PMPAS700 -Vig700S -H81I-PLUS                                        
BIOS 0708  (0708 x64)                                                
BIOS Date: 12/03/2013                                                 
  

Two BIOS files are available, use only one.

BIOS_0708V_Win7 - Legecy BIOS Settings for Windows 7 operating system
	Launch CSM 			[Enabled]
	Boot Device Control		[UEFI and Legacy OPROM first]
	Boot from Network Devices		 [Legacy OPROM]
	Boot from Storage Devices		 [Legacy OPROM]
	Boot from PCI-E/PCI Expansion Devices [Legacy OPROM]
	
Boot\Secure Boot Menu
		OS Type [Other OS]


BIOS_0708W _Win8 - UEFI BIOS settings for Windows 8
	Launch CSM 			 [Enabled]
	Boot Device Control		 [UEFI Only]
	Boot from Network Devices		 [UEFI drivers first]
	Boot from Storage Devices		 [UEFI drivers first]
	Boot from PCI-E/PCI Expansion Devices [UEFI drivers first]

	Boot\Secure Boot Menu
		OS Type [Windows UEFI mode]


BIOS Update Instructions fro EZ-Flash: 
---------------------------------------------------------

1. Save BIOS update zipped file to a temporary directory.

2. Extract the necessary files.

3. Copy the contents of the file to a bootable USB or CD-ROM drive formatted using FAT32/16 on a single partition.

4. Boot the target PC with the device connected or inserted.

5. Select <F8> during POST to display the Boot Menu and select your bootable device.

6.  At the DOS prompt Type 'Flash.bat' to launch the BIOS updates process.

7. Reboot the system once complete.

8. Enter the BIOS Setup and Ensure to load the BIOS default settings to ensure system compatibility and stability. Select the Load Optimized Defaults item under the Exit menu.



IMPORTANT!!!!!

During the update process DO NOT shut down the PC or interrupt the process, this could cause damage to the motherboard.