PMPAS700 -Vig700S -H81I-PLUS BIOS 0708 (0708 x64) BIOS Date: 12/03/2013 Two BIOS files are available, use only one. EZ Flash_0708V_Win7 - Legecy BIOS Settings for Windows 7 operating system Launch CSM [Enabled] Boot Device Control [UEFI and Legacy OPROM first] Boot from Network Devices [Legacy OPROM] Boot from Storage Devices [Legacy OPROM] Boot from PCI-E/PCI Expansion Devices [Legacy OPROM] Boot\Secure Boot Menu OS Type [Other OS] EZ Flash_0708W _Win8 - UEFI BIOS settings for Windows 8 Launch CSM [Enabled] Boot Device Control [UEFI Only] Boot from Network Devices [UEFI drivers first] Boot from Storage Devices [UEFI drivers first] Boot from PCI-E/PCI Expansion Devices [UEFI drivers first] Boot\Secure Boot Menu OS Type [Windows UEFI mode] BIOS Update Instructions fro EZ-Flash: --------------------------------------------------------- For this method you will require a Flash USB device and required BIOS file. 1. Save BIOS update zipped file to a temporary directory. 2. Extract the BIOS file. 3. Copy the BIOS file to a USB device (make sure the BIOS file is on the root directory of the flash drive) 4. Boot the target PC with the device connected or inserted. 5. Press the "Delete" or "F2" key during POST checks to enter the BIOS. 6. Select M-Flash from the BIOS setup menu. 7. Select "Advanced Mode" from BIOS setup program. 8. Go to the Tools menu and select "ASUS EZ Flash Utility" and Press to Enable it 9. Press to switch to the Drive field. 10. Browse through the USB device for the BIOS file (i.e 0708V.CAP). Highlight the BIOS file and Press . 11. EZ-Flash will perform BIOS update. 12. Reboot the System when the update process is done. After BIOS update ensure to load the BIOS default settings. IMPORTANT!!!!! During the update process DO NOT shut down the PC or interrupt the process, this could cause damage to the motherboard.