PMPAS700 -Vig700S -H81I-PLUS                                        
BIOS 0708  (9921 x64)                                                
BIOS Date: 06/04/2014                                                   
  

EZ Flash_0708V_Win7 - BIOS configured with Legecy BIOS Settings for Windows 7 operating system
	Launch CSM 			[Enabled]
	Boot Device Control		[UEFI and Legacy OPROM first]
	Boot from Network Devices		 [Legacy OPROM]
	Boot from Storage Devices		 [Legacy OPROM]
	Boot from PCI-E/PCI Expansion Devices [Legacy OPROM]
	Boot\Secure Boot Menu
		OS Type [Other OS]


***Please DO NOT Update this BIOS if the ME Firrmware is below  9.0.30.1482. Check the BIOS setup for ME firmware version.***


BIOS Update Instructions fro EZ-Flash: 
---------------------------------------------------------

For this method you will require a Flash USB device and required BIOS file.

1. Save BIOS update zipped file to a temporary directory.

2. Extract the BIOS file.

3. Copy the BIOS file to a USB device (make sure the BIOS file is on the root directory of the flash drive)

4. Boot the target PC with the device connected or inserted.

5. Press the "Delete" or "F2" key during POST checks to enter the BIOS.

6. Select M-Flash from the BIOS setup menu.

7. Select "Advanced Mode" from BIOS setup program. 

8. Go to the Tools menu and select "ASUS EZ Flash Utility" and Press <Enter> to Enable it

9. Press <Tab> to switch to the Drive field.

10. Browse through the USB device for the BIOS file (i.e 0708V.CAP). Highlight the BIOS file and Press <Enter>. 

11. EZ-Flash will perform BIOS update.

12. Reboot the System when the update process is done.


After BIOS update ensure to load the BIOS default settings.
 

IMPORTANT!!!!!

During the update process DO NOT shut down the PC or interrupt the process, this could cause damage to the motherboard.