PMPMS730 -Vig730M -H110M PRO-VH                                        
BIOS Version: E7996IV1.2D9
BIOS Date:10/16/2017
ME Version: 11.6.25.1229

BIOS is configured with default BIOS settings for Windows 10                                                                 

Note: If the system is configured with ME firmware 11.0.0.1180, please do not continue with BIOS upgrade process.  Please contact Viglen technical support team for advice as special ME firmware BIOS update file will be required to update to ME firmware Version: 11.6.1.1142 or later


BIOS Update Instructions for M-Flash: 
-------------------------------------------------------

1. Save BIOS update zipped file to a temporary directory.

2. Extract the BIOS file.

3. Copy the BIOS file to a USB device (make sure the BIOS file is on the root directory of the flash drive)

4. Boot the target PC with the device connected or inserted.

5. Press the "Delete" or "F2" key during POST checks to enter the BIOS.

6. Select M-Flash from the BIOS setup menu.

7. Select "Select one file to update BIOS" from M-Flash menu

Plug in the USB media which contains the correct BIOS file, if this was not done in step 4.

8. Browse through the USB device for the BIOS file (i.e E7996IV1.2A1). Highlight the BIOS file and Press enter. 

9. M-Flash will perform BIOS update and reboot. 

IMPORTANT!!!!!

During the update process DO NOT shut down the PC or interrupt the process, this could cause damage to the motherboard.