Following Driver is required for Omnino Pro memory card reader,
SD_Card_Reader Drive_RtsUer_10.0.10125.31214_20150603_WHQL_X


The Omnino Pro supports multiple motherboards. If you are not sure which motherboard you have, the Serial number located on the rear of the Omnino 3 can be used to find out.

If the serial number on the label ends with "791" this indicate system board si Vig791S. 


Other options are:

Vig870G: http://download.viglen.co.uk/files/Motherboards/Vig870G/

Vig855S: http://download.viglen.co.uk/files/Motherboards/Vig855S/

Vig790S: http://download.viglen.co.uk/files/Motherboards/Vig790S/

Vig791S: http://download.viglen.co.uk/files/Motherboards/Vig791S/


You can also use the Serial Number Search data service for  full system configuration, go to:

https://shop.xma.co.uk/serial-number-search


If the label is damaged or you are unable to locate the code, please contact Viglen Technical Support.