PMPAS800 -Vig800S -Q87M-E                                       
BIOS 9071                                                  
BIOS Date: 03/20/2015                                                  
BIOS is configured with default BIOS settings for Windows 7 operating system                                           
  


BIOS Update Instructions fro EZ-Flash: 
---------------------------------------------------------

For this method you will require a Flash USB device and required BIOS file.

1. Save BIOS update zipped file to a temporary directory.

2. Extract the BIOS file.

3. Copy the BIOS file to a USB device (make sure the BIOS file is on the root directory of the flash drive)

4. Boot the target PC with the device connected or inserted.

5. Press the "Delete" or "F2" key during POST checks to enter the BIOS.

6. Select M-Flash from the BIOS setup menu.

7. Select "Advanced Mode" from BIOS setup program. 

8. Go to the Tools menu and select "ASUS EZ Flash Utility" and Press <Enter> to Enable it

9. Press <Tab> to switch to the Drive field.

10. Browse through the USB device for the BIOS file (i.e 0906V.CAP). Highlight the BIOS file and Press <Enter>. 

11. EZ-Flash will perform BIOS update.

12. Reboot the System when the update process is done.


After BIOS update ensure to load the BIOS default settings.
 

IMPORTANT!!!!!

During the update process DO NOT shut down the PC or interrupt the process, this could cause damage to the motherboard.